| |
|
cationic
flocculants
1.Product Performance
This product is easily soluble in water, ethanol and methanol, and does not dissolve in esters,
ketenes and organic solvents. Its molecular chain is relatively
supplying, flexible and more hydrophilic. The quality of relative molecular is high and charges are evenly distributed. Because the ability of "charges counteragent" and "Adsorption Bridge" is strong, the dosage is small and flocculation effect is remarkable.
2.Product Specifications
Item code |
Outward Appearance |
Solid Content(%) |
Intrinsic Viscosity (DL/g) |
pH Value |
Cationic Degree |
| C8301 |
White Particles |
88～93 |
Very High |
5.0～7.0 |
Low |
| C8302 |
88～93 |
High |
5.0～7.0 |
| C8311 |
88～93 |
High |
5.0～7.0 |
Medium Low |
| C8312 |
88～93 |
Middle |
5.0～7.0 |
| C8321 |
88～93 |
High |
5.0～7.0 |
Medium |
| C8322 |
88～93 |
Middle |
5.0～7.0 |
| C8331 |
88～93 |
High |
5.0～7.0 |
Medium High |
| C8332 |
88～93 |
Middle |
5.0～7.0 |
| C8341 |
88～93 |
Middle |
5.0～7.0 |
High |
The Cationic degree and Intrinsic Viscosity can be adjusted according to customer demand.
3.Main Uses
This product is often used to produce antistatic agents, the paper reinforce, the aid flow and filter agents. This product is often used to deal with industry wastewater of dyeing, papermaking, pulp, food, processing aquatic products and fermentation; used in the
discolor and turbidity removal of municipal sewage second treatment; used in
sulphide-containing sludge concentration dewatering of Waterworks, dyeing plants and weaving plant; used in concentrated dehydration of activated sludge of sewage plants; used in metal-containing sludge concentrated dehydration of line board factory and electronic factory; used in sludge concentrated dehydration in the paper industry’s wastewater treatment; used in sludge concentrated dehydration and wastewater treatment of the metals and mining industry; used in products concentration and wastewater treatment of the chemical industry.
4.Usage
During individually using, it should be collocated into dilute solution. The general concentration is 0.1-0.3% (meaning Solid Content). When it is dissolved, the water should be neutral and low hardness, at the same time, the water should not contain suspension material and inorganic salts.
When different water-source and sewage are dealt with, chemicals dose should be ascertained according to the water turbidity and concentration. The best dose can be obtained through a small test. The put points and stirring speed should be selected carefully to ensure its uniform and avoid floc broken.
It is suitable to continuously add the products in use. The collocated solution should be used within four hours. At the same time, the use of the series product with inorganic flocculants (polymeric sulfate, polyaluminum chloride, etc.), can achieve greater results.
5.Package and Storage
It is sealed and packed in PE plastic 50kg or
200kg buckets. Avoiding strong oxidants,
iron, copper, aluminum, and so on. Its
shelf-life is 2 years and follow
non-dangerous goods transportation.
| |
